Freescale Semiconductor kinetis TWR-SMPS-LVFB, Быстрый старт

Страница: 5 / 8

freescale.com
5
Step-by-Step Hardware Installation Instructions
3
Connect DC
Power Supply
Connect the DC power supply provided in
the kit to connector J1. If using an external
power supply then the input voltage range
on J5 should be 20 to 30V DC and the
current should be limited to less than
3A. Do not touch the load resistor when
the DC power supply is connected. The
temperature at the load resistor is very high.
4
Turn ON DC
Power Supply
Turn ON the DC power supply. When
power is applied, the D12 power-on LED
will illuminate. The TWR-SMPS-LVFB board
powers the Tower System with 5V and
3.3V on-board power supplies.
5
Running
A Demo
Please refer to freescale.com/
TWR-SMPS-LVFB to understand what
MCU controller cards are supported, and
to download a Quick Start Guide to learn
more about running the low-voltage
SMPS demo.