FREERIDER X2 HUB, Руководство пользователя, Страница: 5 / 20

6. First
（
you can see we add picture/note with logo
）
6.1. Instructions for unlocking the scooter
To open the scooter,pull out safe PIN firstly( a is the safe pin in picture
①
) and then press the handle
to open down with one hand ( see arrow b and c ), while gently press the handlebars up with the other
hand. Picture
②
is the unfolded scooter, please make sure you insert the safe PIN( d in picture
②
)
6.2. Instructions for mount handlebar
1. Place the alloy clamp onto correct position as picture.
①
, then tighten all M8X25 scews.
2. Place the handlebar to clamp bottom and attach clamp cap as picture
②
, adjust correct angle and
tighten all screws M8X20.
3. Open holder of the display as picture
③
onto handlebar, adjust correct position and tighten all screws
on the holder.
NOTE
Push the handlebars gently into the vertical position until you feel that the mechanism is pressed, make
sure that insert safe PIN.
After the handlebar is fixed, the QUICK -CONNECT connectors for accelerator, light /horn switch, brake
handles, lamp,ignition and display must be connected.
Note the correct polarity and fit accuracy of the connectors.
4
1
2
a
d
b
c
1 2 3