FREERIDER 510GDX, Руководство пользователя

Страница: 32 / 49

RECOMMENDED AREAS FOR ADJUSTMENT
STEERING COLUMN ADJUSTMENT
The steering column locking system works on a "cam" principle to lock the column in the desired
driving position
If you notice the column is not firmly held when the black cam operating lever is fully down,
follow this procedure to re-adjust the "cam" tension:
1.
2.
3.
4.
5.
Push steering column forward as far as it will go with the locking lever released, i.e. pushed
upwards. Support steering column.
With a 10mm spanner (not supplied) loosen the locking nut positioned on the opposite side to
the black locking lever.
Next to the locking nut is a chrome threaded "clamping nut" this has a slightly tapered shape.
Turn this clamping nut clockwise approximately a quarter of a turn.
Push the "black" clamping lever down and test that the tiller is tightly held in place; adjust
"clamp nut" until correct tension is achieved on clamp plates.
Tighten locknut with 10mm spanner.
DO NOT
drive your scooter with the steering handlebars unlocked or poorly adjusted.
31