10
8. Have a second person hold the Console (85)
near the Console Cover (87). Insert the wires
from the Console through the indicated hole.
Connect the Upright Wire (78), the Left and
Right Pulse Wires (90, 91), and the Ground
Wire (97) to the wires extending from the
Console (85).
See the inset drawing. The con-
nectors should slide together easily and
snap into place.
If they do not, turn one con-
nector and try again.
IF THE CONNECTORS
ARE NOT CONNECTED PROPERLY, THE
CONSOLE MAY BE DAMAGED WHEN THE
POWER IS TURNED ON.
8
85
87
97
91
78
Hole
90
78
Console Wire
Wires
9. Attach the Console (85) with four #8 x 3/4"
Screws (1).
Start all four Screws before tight-
ening any of them. Do not overtighten the
Screws.
Tighten the four loops around the wires by
pulling on the ends of the ties.
9
1
1
85
Ties
Ties
