30
REPLACING THE WALKING PLATFORM AND THE
WALKING BELT
Inspect the walking platform periodically for wear. If
there is any wood showing through the phenolic coat-
ing, or if the surface is damaged, the walking platform
should be replaced. When the walking belt becomes
worn, it should be replaced. The walking platform and
the walking belt should be replaced after every 10,000
to 15,000 miles (16,000 to 24,000 kilometers). Follow
the instructions below to replace the walking platform
and/or the walking belt. Make sure to keep track of
which holes the screws go in.
1. Remove the key and unplug the power cord.
Remove the four 5/16" x 1/2" Screws (16) and the
Motor Hood (66).
2. Remove the two #8 x 1/2" Machine Screws (21)
(only one side is shown). Remove the Right Rear
Cap Insert (61) and the Left Rear Cap Insert (not
shown).
3. Remove the indicated #8 x 1/2" Machine Screws
(21) from each side of the treadmill (only one side is
shown).
4. Remove the two indicated #8 x 1/2" Screws (24).
Then, remove the Rear Cap (59).
1
16
16
66
16
21
61
2
3
21
24
59
4
