7
1.
Make sure that the power cord is unplugged.
With the help of a second person, tip the incline
trainer onto its left side. Have the second person
hold the incline trainer to prevent it from tipping.
Attach four Base Feet (80) and four Base Foot
Spacers (79) to the Base (78) with four #8 x 1"
Tek Screws (2).
Be careful not to overtighten
the Tek Screws.
1
2
2
80
80
80
79
79
78
2. Hold the Upright (74) near the incline trainer,
with the brackets on the Upright oriented as
shown.
See the inset drawing.
Wrap the wire tie in the
Upright (74) securely around the end of the
Upright Wire (72). Then, pull the other end of
the wire tie until the Upright Wire is routed com-
pletely through the Upright.
Attach the Upright (74) to the Base (78) with
four 3/8" x 3 1/2" Bolts (3) and four 3/8" Star
Washers (9).
Start all four Bolts before tight-
ening any of them. Be careful not to pinch
the Upright Wire (72).
2
74
78
9
3
72
9
74
72
Wire
Tie
Bracket
3
79 80
2
79
2
Wire
Tie
