Freemotion FMTL39813.2 Скачать руководство пользователя страница 5

Страница: 5 / 36

19. Do not attempt to move the treadmill until it

is properly assembled. (See ASSEMBLY on

page 8, and HOW TO MOVE THE TREADMILL

on page 19.) You must be able to safely lift 45

lbs. (20 kg) to move the treadmill.

20. Do not change the incline of the treadmill by

placing objects under the treadmill.

21. Inspect and properly tighten all parts of the

treadmill regularly.

22.

Never insert or drop any object into any

opening on the treadmill.

23.

DANGER:

Always unplug the power

cord immediately after use, before cleaning

the treadmill, and before performing the

maintenance and adjustment procedures

described in this manual. Never remove the

motor hood unless instructed to do so by an

authorized service representative. Servicing

other than the procedures in this manual

should be performed by an authorized ser-

vice representative only.

24.

Over exercising may result in serious injury

or death. If you feel faint or if you experience

pain while exercising, stop immediately and

cool down.

SAVE THESE INSTRUCTIONS

Содержание FMTL39813.2





































Результаты поиска

Содержание FMTL39813.2

Отзывы:

Бренды по названию

Популярные бренды

Freemotion FMTL39813.2, Руководство пользователя

Результаты поиска

Содержание FMTL39813.2

Отзывы:

Бренды по названию

Популярные бренды