Freemotion FMTK7256-INT.0 Скачать руководство пользователя страница 7

Страница: 7 / 44

Assembly requires two persons.

Set the incline trainer in a cleared area and remove all packing materials. Do

not dispose of the packing materials until assembly is completed

. Assembly can be completed using a 3/8"

hex key, a 7/32" hex key, and a Phillips screwdriver.

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is

the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses

is the quantity needed for assembly.

Note: Some small parts may have been preassembled. To avoid dam-

aging parts, do not use power tools for assembly. Extra hardware may be included.

1/2" Star

Washer (124)–4

1/2" x 2 1/2" Bolt (95)–4

1/2" x 4 1/2" Bolt (96)–4

3/8" x 1" Bolt (51)–4

5/16" x 2" Bolt (102)–4

#8 x 1/2"

Machine Screw

(129)–2

ASSEMBLY

1. Place the Uprights (93) near the front of the Base Frame

(56) as shown.

As you slide the Uprights (93) onto the Base Frame (56),

insert the 80" Wire Harness (118) into the large hole in

the Upright.

Be careful to avoid pinching the wire.

Align the holes in the Uprights (93) with the holes in the

Base Frame (56).

Hole

RIGHT

LEFT

118

Содержание FMTK7256-INT.0













































Результаты поиска

Содержание FMTK7256-INT.0

Отзывы:

Похожие инструкции для FMTK7256-INT.0

Бренды по названию

Популярные бренды

Freemotion FMTK7256-INT.0, Руководство пользователя

Результаты поиска

Содержание FMTK7256-INT.0

Отзывы:

Похожие инструкции для FMTK7256-INT.0

Бренды по названию

Популярные бренды