7
ASSEMBLY
• Assembly requires two persons.
• Because of its weight and size, assemble the
strength equipment in the location where it will be
used. Make sure that there is enough clearance
around the strength equipment.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• For help identifying small parts, see page 6.
• The following tools (not included) are required for
assembly:
one adjustable wrench
one Phillips screwdriver
a set of metric hex keys
snap ring pliers
Assembly may be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
1
1. Remove all parts (31, 32, 41, and 42) from the
Connecting Frame (38).
Orient the Cable (40) as shown,
and insert it
through the Connecting Frame (38).
Route the Cable (40) around the V-pulley (42).
Attach the V-pulley (42) to the Connecting
Frame (38) with the M10 x 70mm Socket Bolt
(41), the two M10 Washers (31), and the M10
Locknut (32) that you just removed.
38
31
31
32
42
41
40
Threaded
End
Small
End
