background image

NOTES

14

3

1.

Read all instructions in this manual before
using the strength equipment. Use the
strength equipment only as described in this
manual. 

2.

It is the purchaser’s responsibility to ensure
that there is enough space around the
strength equipment for the intended exer-
cise. Do not crowd the strength equipment.

3.

Using the anchor strap to provide maximum
stability, anchor the strength equipment to
the floor where required or whenever possi-
ble.

4.

Use the strength equipment only on a level
surface. Cover the floor beneath the strength
equipment to protect the floor.

5.

It is the responsibility of the owner to ensure
that all users of the strength equipment are
adequately informed of all precautions, have
read and understood all warning and caution
labels, and are informed of how to use the
strength equipment properly. 

6.

Keep children under 12 and pets away from
the strength equipment at all times. 

7.

Always wear athletic shoes for foot protec-
tion while exercising.

8.

Keep hands and feet away from moving
parts. Do not lean on or rest your hands on
the strength equipment when it is in use.

9.

All users of the strength equipment should
be instructed to report any injury or strength
equipment irregularity to facility staff imme-
diately.

10. Make sure the weight pin is completely

inserted into one of the weight plates.

11. Check all cables, cable connections, and pul-

leys before each use of the strength equip-
ment. Make sure all parts are properly tight-
ened. Replace any worn parts immediately. 

12. Make sure the cable remains on the pulleys

at all times. If the cable binds while you are
exercising, stop immediately and make sure
the cable is on the pulleys and nothing is
interfering with the cable or pulleys. Replace
all cables at least every two years.

13. The strength equipment is designed to sup-

port a maximum user weight of 350 lbs. (159
kg).

14. Keep the strength equipment indoors, away

from moisture and dust. Do not put the
strength equipment in a garage or covered
patio, or near water.

15. If you feel pain or dizziness at any time while

exercising, stop immediately and begin cool-
ing down.

WARNING:

Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product. 

WARNING: 

To reduce the risk of serious injury, read the following important precautions

before using the strength equipment.

IMPORTANT PRECAUTIONS

Содержание GZFI8063.4

















Отзывы: