5
Answering a call using a telephone with Lifter attached
The telephone rings
While wearing the headset, press the ON/OFF button on the headset
The lifter function activates (telephone connection opens)
To end the call press the ON/OFF button on the headset
The lifter function will de-activate (telephone connection closes)
6
Adjusting the TX (transmit) volume
The TX (transmit) volume can be adjusted using the volume control located on the
back of the base unit.
Adjust the volume by pushing +/- button to increase or decrease the level. The
volume should be set to personal preference.
To adjust follow these steps:
Make a telephone call and ask the person you are calling for their assistance.
Adjust the volume as you talk by pushing the volume control up(+) or down(-)
Ask the person you are calling to tell you when the volume of your voice is
acceptable.
If the TX(transmit) volume is still low, then set the MICROPHONE
SELECTION switch located on the back of the base unit to
“B”
