1
Power ON/OFF the headset
1. Power OFF - Press and hold the ON/OFF button on the headset until RED
LED is blinking twice. Release the button.
2. Power ON - Press ON/OFF button on the headset shortly or place the
headset on the Base unit.
2
Pairing your Headset and Base Unit
1. Press and hold the pairing button on left side of the front panel of the Base
unit about 2 seconds. Release the button.(RED LED is blinking faster)
2. Press and hold the mute button on the headset until RED LED is blinking.
Release the button.
Check the LED status when you push the ON/OFF button of headset.
BASE LED
HEADSET LED
IN USE Mode
BLINKING
OFF
Stand-by Mode
ON
BLINKING every 10 seconds
Not paired
BLINKING
OFF
