Freefly RADIAN, Инструкция по эксплуатации

Страница: 14 / 22

P25 P26
IMPORTANT:
The Freefly USB to Serial Programmer (FFUSB) does not supply 5V power for the Radian.
You will need to supply 5V power to the module in order to program. Attach the other
end of the program cable to the FFUSB observing the polarity shown in Image 12. Using
device manager in Windows, determine which COM port the FFUSB is using and then
select the proper COM port in the Freefly Radian Stabilizer interface found under the
Window > Comms Link toolbar. Click “Connect” on the diagnostics menu. The “Servo
Out” slider will turn green if the connection is active.
TIP:
The FFUSB programmer is set to default to COM10 port. If you go into your device
manager and re-assign the device to “COM10,” then you will not have to select the
COM port in the Radian software each time you use it.
IMAGE 12