Freefly MoVI M10, Инструкции по обновлению

Страница: 3 / 4

04.
Loosen the Clamp
Handle Toad then
center one of the new
Upper Cross Bars
(450mm or 550mm) in
it. Slightly tighten the
Clamp Handle Toad’s
adjustable levers to
keep the Upper Cross
Bar in place.
05.
Slide the loosened
Hand Grips onto the
new Upper Cross Bar.
Tighten grips slightly
to prevent them from
sliding off of the boom
during alignment.
Reinstall your Accessory
Mount before reinstalling
the Hand Grips.
06.
To align the Hand Grips
properly, place the new
Upper Cross Bar with
Hand Grips on a flat
surface, rotating the
grips as needed. Once
alignment is set, fully
tighten Hand Grips.
If desired, insert the Top
Handle into the new Clamp
Handle Toad.