Freefly MoVI M10, Инструкции по обновлению

Страница: 2 / 4

01.
Using the 2.5mm driver,
loosen the 4 M3
×
45mm
socket head cap screws
to remove the current
handle on the M10.
Be sure to mark the front
direction of the carbon plate
attached to the Pan Motor.
02.
Loosen both Hand Grips
on the Upper Cross Bar
and slide both grips off
the Upper Cross Bar.
If the Top Handle is installed,
remove it now.
Remove Accessory Mount
from the Upper Cross Bar
if present.
03.
Attach the Toad In The
Hole Quick Release
(Female Adapter)
to the carbon plate
on the Pan Motor
using the 4 supplied
M3×10mm socket head
cap screws. Position
the latch of the TITH
pointing to the front of
the MōVI.