P28
AUXILIARY TRANSMITTER
The MōVI Controller Receiver can optionally be used as an Auxiliary Transmitter for controlling third-party wireless follow-focus systems. For more information on
supported systems, see the Follow-Focus Integration section. To change modes:
1 - Move the Receiver Channel Switch to the position indicated in the table below.
2 - Hold down the FW Button and then press the Bind Button once.
3 - The new mode will be active after the next power cycle.
1 Auxiliary Transmitters and Auxiliary Data Port connector are sold separately.
MODE
CONNECTS TO
DESCRIPTION
MōVI Controller Receiver Status LED:
(Solid Green)
Set Channel: 0 - C
Press Bind Button while holding down FW Button.
MōVI Gimbal Controller, MōVI Data Port.
(See Receiver Installation section.)
This is the normal operating mode for two-way
communication from the MōVI Controller to the
MōVI. The Receiver thatcomes included with the
MōVI Controller is in this mode by default.
microRemote Auxiliary Transmitter Status LED:
(Slow-flashing green/orange)
Set Channel: D
Press Bind Button while holding down FW Button.
MōVI Controller Auxiliary Data Port.1
In this mode, the MōVI Controller Receiver acts
as an Auxiliary Transmitter for sending commands
to a Redrock Micro microRemote Basestation.
Axis 1 Auxiliary Transmitter Status LED:
(Fast-flashing green/orange)
Set Channel: E
Press Bind Button while holding down FW Button.
MōVI Controller Auxiliary Data Port.1
In this mode, the MōVI Controller Receiver acts
as an Auxiliary Transmitter for sending commands
to a Hocus Products Axis 1 Digital Receiver.
