P22
• MAJESTIC MODE:
This configures the MōVI's single-operator mode, called Majestic Mode, and is enabled using the MODE switch (M, center position,
for Majestic) or by turning off the MōVI Controller. There are two Majestic Mode options:
TILT LOCK
Allow the tilt axis to be positioned by hand, then holds that angle.
TILT ON
Allow the tilt axis to be controlled by pointing the MōVI handles.
• MAJESTIC PAN/
TILT SMOOTHING
• MAJESTIC PAN/
TILT WINDOW
In Majestic Mode, pan (and tilt, if enabled) are controlled by pointing the MōVI handles. An adjustable amount of smoothing is added to
the camera movements here. Higher values will give smoother pan and tilt movements, but more lag. Lower values will force the camera
to follow the handles more closely.
In order to eliminate unintentional pan/tilt movements and maintain stability, an adjustable window can be set within which Majestic Mode
will ignore MōVI handle movements. A lower window will cause the camera to follow the handles more accurately, for slow, precise shots. A
higher window will allow for handle movement without affecting stability, for dynamic running or jumping shots.
To access the full range of MōVI configuration settings, use the MōVI Configurator app available for PC, Mac, and Android at:
http://www.freeflysystems.com/.
For a more detailed description of each MōVI configuration parameter, refer to the MōVI manuals available at:
http://www.freeflysystems.com/media/instruction-manuals.php.
• RADIO ACTIONS:
Select an action to perform for configuring the primary radio. Start the action by clicking the Menu Set knob. Note: These actions will
momentarily halt MōVI control and telemetry while the radio is being configured. The MōVI may briefly return to Majestic Mode during
this time.
READ
Read the current Channel, Device Group, and Power Level from the radi.
WRITE
Write the modified Channel, Device Group, and Power Level to the radio.
BIND
Add a new receiver to the current Device Group. This will allow the MōVI Controller to communicate with the new Receiver. See Binding to
a New MōVI Controller Receiver above.
RADIO CONFIG
Settings for configuring the primary 2.4GHz radio transceiver are located here. You can also bind to a new Receiver in this menu.
