DO NOT attach or incorporate electrical appliances or accessories into or onto The Spa Coverlift as
an electrical hazard could be created, resulting in injury or death.
DO NOT lean, sit, stand on or play around The Spa Coverlift that could cause a loss of balance
resulting in injury.
Use of The Spa Coverlift for any application other than for which it was designed is solely at the
purchaser’s risk and manufacture, importers, distributors, agents, resellers, dealers and retailers will
not be held liable for such use resulting in injury, property damage or damage to the product.
!!! WARNING !!! PLEASE READ !!! WARNING !!!
Tools required for assembly:
1.
Phillips Screwdriver
2.
Power drill with a 1/16” drill bit
3.
Adjustable wrench (2)
4.
Pen, Pencil or Marker
Assembly Accessories and Parts List
BEFORE YOU GET STARTED SPA MUST BE COMPLETELY DRAINED
You will need to make sure you have at least 2 feet of clearance of all 4 sides of your
spa. We recommend the coverlift opens toward the back of the spa away from the
control panel. Mounting the coverlift in any other orientation may cause interference
with the spa's front access panel if any repairs or maintenance of spa is required in
the future.
Foot Pedals(2)
Screw End Caps (18)
Pivot Bolts A (2)
(with rubber padding)
Spacer Block (4)
1” Self Tapping
Screws (18)
Locknut caps (4)
#M12 Locknuts (4)
Pivot Arm
Bolts B (2)
Pg. 2, Rev. 2, 4/21/14
Coupler (1)
Cover Support Arm (2)
Side Pivot Arm (2)
Coupler Extension
(For Spa Cover between 73”~92”)
Pivot Arm (2)
Cover Support Arm (2)
Coupler (1)
(For Spa Cover up to 72”)
Coupler Extension (2)