v3.2-F6
FreedomAlert
®
9
Connecting the Base Unit
Power Connection
.
Simply plug the AC Adapter into the nearest electrical
outlet. Plug the other end of the AC power adapter into the Base unit. You
need to push the plug into the opening in the Base unit and twist 90’ clockwise
to lock in place. To remove in the future, simply rotate 90’ counter-clockwise
and pull outward.
Caution: Do not plug the AC Adapter into an outlet which is controlled
by a switch. The switch could accidentally be turned off, thus rendering
the Base unit inoperable after approximately 24 hours when the back
up batteries become discharged.
Telephone Connection
.
No special phone line or special service is required
to use your FreedomAlert. It works the same way as any cordless phone.
(
Touch Tone service is required)
. Simply plug one end of the telephone
cord into your telephone jack in the wall, and the other end into either one of
the telephone jacks at the back of the Base unit. Note - you will feel a ‘click’
when the jacks are firmly seated in the wall and the Base unit jack receptacles.
If you need to plug a conventional telephone into same outlet used by the
FreedomAlert, simply plug the telephone into the spare jack at the back of
the Base unit.
Key to POWER, INFO, and CHARGER LED Lights on Product:
BASE RED LED functions:
Off:
No AC power/No Back-up Battery Power
Solid:
AC power
Flashing: Running on Battery Back-up
