INSTALLATION INSTRUCTIONS
Silhoue
tt
e
Shower Seat
LIFESTYLE & WELLNESS
®
Page 2
of 4
2.
Loca
ti
ng the Shower Seat in the desired posi
ti
on for Walk-in Showers and Tub Enclosures.
Walk-in Shower
Tub Enclosure
Remove and open the paper template from the
shipping carton.
Locate the area with 2” solid wood in-wall
backing. Determine desired seat height (ADA
requirements s
ti
pulate a seat height of 17” – 19”
from the
fl
oor). Using the template (supplied by
manufacturer), align hole centerlines with the in-
wall backing. Using a level (not provided) ensure
the “Top of Seat Frame Moun
ti
ng Bracket” line is
level.
Tape the template into posi
ti
on on the moun
ti
ng
surface.
When installing the seat in a tub enclosure, place
the shower seat (in the open po
siti
on) against
the template, prior to install
ati
on, to ensure the
bo
tt
om of the seat will clear the tub dam.
Using a pencil or suitable marker, it is extremely
important you mark the center of each of the six
(6) moun
ti
ng holes precisely on the moun
ti
ng
surface. (See Diagram A)
FREE
OM
Showers.com
