7
Manually Powering the Unit On and Off
The unit automatically powers on when you open it and move the monitor from
its closed position. The unit powers off when you collapse and close it.
To manually power the unit on and off, do the following:
1. Press the POWER button
. It is located next to the power jack on the left
side of unit.
If the unit is off, the
reading light turns on, and the camera’s current view
displays on the screen.
2. If an image does not display on the screen, try the following:
Press the POWER button
on the side of the unit
Make sure the power cord is connected to the unit
Make sure the power cord is plugged into a power outlet
If a battery is installed, verify that it is charged. A flashing red LED
indicates low battery. See
Battery Status
on page 8 for more
information.
Ensure that the wall outlet has power and is not malfunctioning. If the
outlet is connected to a wall switch, make sure the switch is on.
For more solutions, refer to
Troubleshooting
on page 35
3. To turn the unit off, press the POWER button
again.
