9
3.
On the computer, go to the Control Panel and type "bluetooth" into the
Search edit box.
4.
Press
TAB
to move to Add Bluetooth Device and press
ENTER
. The
computer will begin searching for Bluetooth devices. This may take
several seconds. You are placed in the list of devices when the search
is complete.
5.
Use the
ARROW
keys to select your Focus display from the list, for
example, Focus 40 BT, and then press
ENTER
. If the Focus display
was not found, make sure it is turned on then select the Retry button.
6.
When prompted to enter a pairing code, type 0000 into the edit field,
and then press
ENTER
to finish pairing the display.
You must now configure JAWS to use the Bluetooth connection. Note that it is
not necessary to first establish a USB connection before using Bluetooth. If you
have not yet set up a USB connection with the Focus display, do the following:
Note:
If you are using a third-party screen reading application, refer to the
documentation that came with the software as these procedures might
be different.
1.
Press
J
to open the JAWS window.
2.
Press
ALT+O
to open the Options menu and select Braille to open the
Braille Basic Settings dialog box.
3.
Press
TAB
to move to the Add Braille Display button and press
ENTER
.
4.
In the list of braille displays, choose Focus and press the
SPACEBAR
to select it, and then choose Next.
5.
In the Select the output port edit combo box, choose Bluetooth.
6.
Choose next and make sure that the Focus is selected as the primary
display.
7.
Select Finish and you are instructed to restart JAWS in order for these
changes to take effect. Select OK to close this message and once
more to close the Braille Basic Settings dialog box.
8.
Quit and restart JAWS and your Focus Blue is now communicating
with JAWS over Bluetooth.
