INSTALLATION INSTRUCTIONS
1222 Instructions 3-9-15.doc
Page 5 of 5
Step 19:
Insert any of the excess power harness
wire into the
½
hole and install the Freedom
Charger into the bottom of the armrest.
Step 20:
Test system. LED light will illuminate
blue once accessories are on. Once Qi equipped
device is placed on Freedom Charge LED will
illuminate Green and charging begins. *Please
note on some devices syncing may take up to 15
seconds. Coil locations vary on various devices;
move device on mat until LED illuminates green.
Step 21
: Reassemble vehicle. Follow your
disassembly steps in reverse order, taking care not
to bind the harness wiring when reinstalling trim.
Step 22:
Place removable consumer product label
on center of mat.
