Freecom VALUELOADER DLT, Руководство пользователя

Страница: 69 / 90

Diagnostics and Troubleshooting
Troubleshooting
ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual 55
ValueLoader Performance
The ValueLoader is not
efficiently backing up data.
• Check the network bandwidth from the host computer. If you
are backing up data over a network, consider comparing to a
local-only backup.
• Make sure that the ValueLoader is on its own SCSI bus and not
daisy-chained to another tape drive or to the hard drive being
backed up.
• Clean the tape drive. See Cleaning the Tape Drive on page 34
for instructions.
• Try a new cartridge. A marginal cartridge can cause
performance problems due to bad spots on the tape requiring
retries.
• Make sure that the data is being compressed.
• Check the size of the files. Small file size can impact
performance.
• Confirm that the backup application is utilizing block sizes of
at least 32 KB, preferably 64 KB. Refer to your application’s
documentation for details.
Cleaning
Recurring cleaning
message.
• Make sure you are using a compatible cleaning cartridge.
• Replace the existing cleaning cartridge with a new one.
• If the Media Attention LED is cleared using a cleaning
cartridge and then immediately reappears after a particular
data cartridge is reloaded, that data cartridge might be
contaminated. If this occurs, check that the data cartridge can
be read, back up data from the suspect cartridge to another
cartridge, and then discard the suspect cartridge.
The Clean Drive LED is
illuminated.
• Indicates that 250 tape motion hours have passed since you
last cleaned the tape drive.
• Clean the tape drive. See Cleaning the Tape Drive on page 34
for instructions.
Problem Solution