12
FREECOM Traveller II Series
GB
2
Traveller II Premium
Switch off the computer and all other devices.
1. Plug the Power Module on the backside of the Traveller II.
Note: Before your FREECOM Traveller II Premium will work properly, a
battery must be inserted in the power module. This also applies when
the device is operated with a power pack.
When using a drive with batteries, it should be charged before operating the
first time! Use only the battery delivered with your FREECOM Power Module.
2. Connect the drive plug of the FREECOM Cable II with the Traveller II.
3. Connect the other part of the FREECOM Cable II with your PC/Notebook.
4. Connect the delivered mains-cable to the mains socket of the FREECOM drive
and then connect the mains plug into the socket.
5. Switch on the computer and all other devices.
6. Begin with the software installation.
Further installation has to be taken from the respective
FREECOM Cables II
manual
.
Click on!
Push
down!
Slip
on!
m
!
6
6
