Free The Tone TRI AVATAR Скачать руководство пользователя страница 8

14

15

Specifications & Ratings

• Number of presets: 128
• Input impedance: min. 500k

Ω

• Output load impedance: min. 10k

Ω

• Max. input level: +7 dBu
• Controls: RATE, TONE, DEPTH L/C/R, DRY MIX, LEVEL
•  Terminals: 4 x 1/4” phone jacks (IN, OUT-L(MONO), OUT-R, EXP), 1 x DIN 5P IN connector (MIDI IN), 

1 x DC9V input jack (for connecting AC adapter)

• Power supply: 9V DC center negative polarity
• Current consumption: 150 mA
•  Dimensions (W x D x H, incl. protuberances such as footswitches, jacks): 120 x 102.3 x 58.5 mm 

(4.72 x 4.03 x 2.30 in)

• Weight (excl. accessories): approx. 380 g (0.84 lbs)
• Accessories: Warranty card, Quick Start Guide, Safety Precautions, 4 x rubber feet
Specifications and appearance subject to change without notice.

Support/Service

Contact the following for support and/or repair service.

e-mail address: [email protected]

 Caution

Do not use or store the unit in environments where it will be exposed to:
•  Extreme temperatures (direct rays of the sun, heat sources such as 

radiators or stoves)

• High humidity or moisture
• Excessive dust or sand
• Excessive vibration or shock

Whenever leaving the unit unattended for long periods, be sure to 

unplug the AC adapter from the power source to avoid creating 
a fire hazard.

Take care not to drop the unit, and do not subject it to excessive 

pressure or weight.

Do not press the switches on the unit with a bare foot, or unexpected 

injury may result.

Do not use solvents (such as benzine, paint thinner) on the unit, since 

these may dull the finish or damage the surface.

 Warning

Never try to disassemble, or modify the unit.

Stop using the unit if you notice smoke or a strange odor coming from 

it and unplug the AC adapter from the outlet.

Never try to repair the unit or replace parts unless so instructed by the 

user’s manual. For other repair or parts replacement contact your 
local dealer or Free The Tone.

Never unplug the AC adapter while your hands are wet.

Do not apply too much pressure or tension or place a heavy object on 

the power cord. Doing so may damage the power cord and create 
a danger of fire or electrical shock.

Turn off the unit and unplug the AC adapter from the outlet and 

contact your local dealer or Free The Tone for repair in the case 
of any of the following:

• The power cord is damaged.
•  Foreign objects (coins, pins, etc.) or liquid enter the unit.
• The unit gets wet from rain or other liquid.
• The unit is out of order.

Be careful of heat radiation from the unit.

Never cover the AC adapter with cloth or other objects. Built-up heat 

can deform the case or cause a fire hazard.

Safety Precautions

Precautions are identified by the two types of symbols below:

 Caution

This symbol indicates that a risk of serious personal injury or material 

damage may result if precautions are ignored.

 Warning

This symbol indicates that a risk of death or serious personal injury may 

result if precautions are ignored.

Be sure to read these precautions and the user’s manual before using this product.

Содержание TRI AVATAR









Отзывы: