Free The Tone TRI AVATAR, Руководство пользователя, Страница: 7 / 8

12 13
Correspondence between parameters and MIDI control change numbers
Controls MIDI CC Numbers Value Range
RATE 85 0–127
TONE 86 0–127
DEPTH RIGHT 87 0–127
DEPTH CENTER 88 0–127
DEPTH LEFT 89 0–127
DRY MIX 90 0–127
LEVEL 91 0–127
EFFECT ON/OFF 64 off = 0, on = 127
Initializing
Updating Firmware
Factory Presets
NOTE
This operation clears all of the presets and resets them to the factory settings.
1. While holding down the MODE and PRESET switches, turn on the power to the TRI AVATAR.
2. Keep the two switches pressed until the PRESET 1–4 LEDs illuminate steadily. Release the switches
when the four LEDs are on.
3. All of the presets return to the factory shipment status and the TRI AVATAR is ready for usual operation.
The firmware of the TRI AVATAR can be updated. For the latest firmware or connection and setup
procedures, please confirm with the product or support page of the Free The Tone website.
PRESET 1 Spacious three-phase chorus sound
PRESET 3 Wide and round chorus sound
PRESET 2 Sound with vibrato effect
PRESET 4 Mixing dry (original) sound with three-phase chorus sound