Free Spirit C 249 30087 0, Руководство пользователя

Страница: 27 / 37

26
MAINTENANCE INSTRUCTIONS
TREADBELT ADJUSTMENT
The treadbelt has been factory pre-adjusted, however
if during the operation:
Treadbelt slips during use if the treadbelt is too loose :
a) Tighten both rear roller adjusting bolts 1/4 turn
clockwise using allen wrench.
Treadbelt shifts too far to the right
a) Set the treadmill speed to 3.5 M.P.H.
b) Tighten the right adjusting bolt a 1/4 turn clockwise
using allen wrench.
c) Wait 15 seconds: if no change; turn the left adjusting
bolt a 1/4 turn counter-clockwise using allen
wrench.
d) Repeat steps b and c until belt is centered.
Treadbelt shifts too far to the left
a) Set the treadmill speed to 3.5 M.P.H.
b) Tighten the left adjusting bolt a 1/4 turn clockwise
using allen wrench.
c) Wait 15 seconds: if no change; turn the right adjusting
bolt a 1/4 turn counter-clockwise using allen
wrench.
d) Repeat steps b and c until belt is centered.
IMPORTANT
DO NOT OVERTIGHTEN TREADBELT
If treadbelt is over-tightened, edges of treadbelt will
begin to curl.
CAUTION!! DO NOT ALLOW ANYONE TO WALK ON THE TREADBELT WHILE YOU
ARE ADJUSTINGS.
1/4 TURN
1/4 TURN
1/4 TURN
If TREADMILL
slips during use.
too far to RIGHT.
If TREADMILL is
If TREADMILL is
too far to LFFT.
If Treadbelt slips during use.
If Treadbelt shifts too far to the right
If Treadbelt shifts too far to the left