FRC FDA700 for Delta Winding, Инструкция по эксплуатации

Страница: 8 / 20

FDA700 Rev160509
8
Install Current Sensor
Three current sensors are supplied. It is best to mount the sensors in the circuit
breaker box. For each phase that is to be monitored, run the wire from the generator
through the current sensor opening (hole) to the input side of the circuit breaker.
(Refer to Wiring Section.)
Install Voltage Transformer
The voltage transformers supplied will work for 120 or 240 volt AC systems. The
transformers should be securely mounted inside the electrical box.
Each transformer will be connect to show line voltage phase and neutral or phase
to phase for star or delta windings of the generator. (Refer to Wiring Section.)
Install Optional Temperature Sensor
The temperature sensor is installed as required. (Refer to Wiring Section.)
Install Optional Buzzer
Install the buzzer close to the control module so the audible warning is easily
associated with the visual warning on the display. The optional buzzer provided by
FRC requires a cutout hole of 1-1/8" (1.125"). (Refer to Wiring Section.)