ICA900 Rev150324
11
Figure 5. ICA900 Cables
Cables
+12(24)VDC
GND
Ignition Key
RED
BLK
BLU
BRN
Speaker Cable Assembly
(P/N XE-IC9SPKR-C0A)
with 2-Pin Deutsch Connector.
WHT
BLK
WHT
GRN
For Two or Three-Way System
Extension Cable Assembly
(P/N XE-IC9EXT-C20A)
To Pins 5 and 6 on Remote.
To Install the Second Extension Cable Assembly
(P/N XE-IC9EXTP-C20A)
- This cable can be installed on either of the first two control modules.
- Remove the plugs from the 12-Pin Connector at pins 7 and 8.
- Insert pins that are crimped on the cable into the 12-Pin Connector.
Black wire at pin 7. White wire at pin 8.
- Connect the other end of cable to pins 5 and 6 on the third control module.
White wire to 5. Black wire to 6.
WHT
GRN
WHT
BLK
Butt
Crimps
Line 1
WHT
BLK
WHT
GRN
WHT
BLK
For Three-Way System
Second Extension Cable Assembly
(P/N XE-IC9EXTP-C20A)
To Pins 5 and 6 on Third Module
Line 2
Notes:
- All cables can be cut to length.
- Speaker cable standard length is 5 feet.
- Extension cable standard lengths are 20 feet (-C20A). Longer cables are available.
- Provide enough slack in the cable when using the mounting bracket for the control
module or speaker box to be adjusted as needed.
