Fraser IONFIX COMPACT, Быстрый старт

Страница: 7 / 12

7 ©
Fraser Anti-Static Techniques Ltd
2017
Generator configuration menu
The generator configuration menu has four sections:
1. Remote Mode – allows the generator remote interface to be enabled and configured.
2. Advanced Settings – allows various aspects of generator operation to be adjusted.
3. System Information
– provides diagnostic information about the generator.
4. Fault Count - provides diagnostic information about the generator.
See the full manual for details of the configuration menu and settings/parameters.
To access the menu the following keys are used:
• Right (
►
):
Enter menu system, move down to a lower level, access parameter to adjust.
• Left (
◄
) : Move up to a higher menu level, exit menu system.
• Up (
▲
) : Move up a list of menu items, increase parameter value.
• Down (
▼
): Move down a list of menu items, decrease parameter value.
• OK:
Move down to a lower menu level, save parameter setting.
Pressing any of the setpoint adjustment buttons (V/-, C/-) whilst using the menu will exit
the menu system.
Remote Interface
The generator is equipped with a remote control and monitoring interface, provided on a 25-way D-type
socket at the rear of the generator. The functions and connections are as follows:
Pin No. Function Pin No. Function
1 Remote on/off input +ve 14 Remote on/off input -ve
2 Remote current setpoint input 15 GND (0 V)
3 Remote voltage setpoint input 16 GND (0 V)
4 Remote voltage monitor output 17 GND (0 V)
5 Remote current monitor ouput 18 Reserved, do not connect
6 Reserved, do not connect 19 GND (0 V)
7 +12 V reference output 20 GND (0 V)
8 Reserved, do not connect 21 Reserved, do not connect
9 Arc/Limit open collector 22 Arc/Limit open emitter
10 Operating open collector 23 Operating open emitter
11 Reserved, do not connect 24 GND (0 V)
12 Not connected 25 Reserved, do not connect
13 Not connected