background image

CDU680 Quick Installation Guide Windows Mac Linux Ver-UAC01 

 

Setup for Linux-Ubuntu

 Users

 

Scripts for Ubuntu Linux distribution are provided. You may 

need to develop your own scripts for other distributions.   

   

1.

 

Insert the CDU-680 USB Modem+Disk

TM

 into an USB slot on your PC.    The device 

will be shown as a removable storage on your computer.     

2.

 

The script files are located under the “Linux” directory.    Copy the whole 
directory to your desktop. 

3.

 

Do the following steps: 

a.

 

Open terminal   

b.

 

Run “cd Desktop/Linux" 

c.

 

Run "sudo ./connect" 

d.

 

Enter root password (Admin Password) 

4.

 

Device will switch to modem mode and attempt to connect. 

5.

 

To disconnect, press Ctrl-C twice. 

 

        User Name and Password configuration information; 

FOR SIP only (QCMIP=0) Carriers   
SIP carrier case, you may need to modify following part at “execute.sh” file. 
Please replace Username and Password with your Service providers (SIP User ID and 
Password)  
"Phone = #777\nUsername = <MDN>@acsalska.net\nPassword = <MDN>" >> 
cdu680config 
 
SIP Username and Password information: 
ACS Alaska : 
1x and EVDO 
Login: <MDN>@acsalaska.net, Example:[email protected] 
Password: MDN (MDN is 10 digits Modem Phone Number) 
 

Содержание Modem+Disk CDU-680DOrA









Отзывы: