-18-
Making Requests With MAX and MIN
Requests With Qualifiers
Like Limiters, Qualifiers limit list request that start with MAX or MIN. Unlike Limiters,
however, you can use as many Qualifiers in a request as you like, and in any order.
For example, MIN WT HR GT 20 SS AL BR. This requests asks for the lightest
players (MIN WT) to hit more than 20 home runs (20 HR) in a single season (SS)
in the American League (AL) batting right-handed (BR).
You can type Qualifiers directly at the Request line. Or you can select them on the
Qualifiers menu. For a complete list of Qualifiers, see Appendix D in this manual.
____________________________________________________________________
1. On the Request menu, press the down arrow key to highlight Maximum
(MAX).
2. Press the right arrow key.
You see the Batting Statistics menu.
3. At the Batting Statistics menu, highlight Slugging Percentage.
Then press the Enter key.
The Request lineshould now display MAX SLG.
4. On the Focus Your Request menu, highlight Select Qualifier(s).
5. Press the right arrow key.
The highlight bar should now be in the Qualifiers menu. You select Qualifiers by
pressing the arrow keys to highlight them and then pressing the Enter key. You'll see
a check mark next to each. To undo a Qualifier selection, press the Enter key at it a
second time.
6. Select the following Qualifiers: Bats Right (BR), Not Hall of Fame (NHOF),
and American League (AL).
7. Press F1.
The Request lineshould read MAX SLG BR AL NHOF. This request gives you the
players with the highest slugging percentage (MAX SLG) who bat right-handed (BR),
play in the American League (AL) and are not in the Hall of Fame (NHOF).
8. When you're done, press the Escape key twice.
