Franklin 63051 Скачать руководство пользователя страница 3

Page 3

For technical questions, please call 1-888-866-5797.

Item 63051 
        

Sa

FE

ty

Op

E

ra

ti

O

n

M

aint

E

nan

CE

a

SSEMBL

y

8. 

Do not use for cantilever applications.   
Use with supports directly underneath.

9. 

rated working load: 900 lb. for one stage.  
total combined weight of workers and 
materials must not exceed rated working 
load. Do not overload.  Distribute load evenly. 
Be aware of dynamic loading! Jumping 
on or dropping load may briefly create 
excess load causing product failure.

10. 

Do not stack scaffold over one stage high.

11. 

position on hard level surface, level 
the working/standing surface, and lock 
wheels before getting on scaffold.

12. 

Do not use ladder or other climbing 
device on top of scaffold.

13. 

Use guard rails, mid rails and toe 
boards as required by local, state and 
federal regulations.  Using such safety 
devices is always recommended.

14. 

Do not

 

climb onto Scaffold from ladder 

unless both Scaffold and ladder are secured 
from movement in all directions.

15. 

Scaffolds that are covered in ice or snow 
cannot be used until they are cleaned 
off thoroughly.  

Scaffolds MUST NOT be 

used during storms or in windy weather.

16. 

Work stands may only be used on a floor 
or surface which is within 1-1/2 degrees 
from level, smooth (the equivalent 
of broom finished concrete) and free 
from pits, holes or obstructions.

17. 

all tools or materials shall be secured or 
removed from the platform unit(s) before 
the mobile work stand is moved.

18. 

persons shall be prohibited from riding on 
mobile work stands while they are being moved.

19. 

Wear anSi-approved safety goggles, 
a hard hat, heavy-duty work gloves, 
and OSHa specified safety harness 
during assembly and use.  

Wear additional safety gear as required 
by local, state, and federal regulations.

20. 

Keep children away from Scaffold.

21.  Keep work area clean and well lit.  Cluttered 

or dark areas invite accidents.

22.  Stay alert, watch what you are doing 

and use common sense when using this 
Scaffold.  

Do not use while you are tired or 

under the influence of drugs, alcohol or 
medication.

  A moment of inattention while 

using may result in serious personal injury.

23.  Only use safety equipment that has been approved 

by an appropriate standards agency.  Unapproved 
safety equipment may not provide adequate 
protection.  Fall-arrest systems must be OSHA-
approved, eye protection must be ANSI-approved, 
and breathing protection must be NIOSH-approved 
for the specific hazards in the work area.

24.  Store idle Scaffold out of the reach of children and 

do not allow persons unfamiliar with the Scaffold to 
climb on, or use it for any purpose.  The Scaffold 
is dangerous in the hands of untrained users.

25. 

Check for misalignment or binding of parts, 
cracks and/or breakage of parts, and any other 
condition that may affect safe operation.  

Many 

accidents are caused by poorly maintained tools.

26. 

the warnings included in this manual are 
intended to give general safety guidelines.  
Scaffold safety regulations may change 
periodically.  the operator is responsible to be 
familiar with and obey current OSHa guidelines 
as well as local, state, and federal regulations 
regarding the set up and use of this product.

27.  Have Scaffold serviced by a qualified repair 

person only.  This will ensure that the 
safety of this Scaffold is maintained.

28.  Only use the included platform or an identical 

replacement platform.  The platform must 
not extend beyond the base support.

29.  Maintain labels and nameplates on the 

Scaffold.  These carry important safety 
information.  If unreadable or missing, contact 
Harbor Freight Tools for a replacement.

30.  The warnings, precautions, and instructions 

discussed in this instruction manual cannot 
cover all possible conditions and situations 
that may occur.  It must be understood by the 
operator that common sense and caution are 
factors which cannot be built into this product, 
but must be supplied by the operator.

 SaVE tHESE inStrUCtiOnS.

Содержание 63051













Отзывы: