Franklin Wireless S600, Руководство пользователя

Страница: 3 / 5

3
The S600 development Kit is used to debug the Franklin Wireless M600 series module. It is designed by
an auxiliary board with Franklin Wireless M600 series module embedded. When the S600 is used, you can
connect the module to a PC through a USB cable. When the module works normally, the debugging
functions can be implemented. The S600 provides multiple interfaces, such as the Mini-USB port, DC
power jack, RF connectors.
The S600 can be used to test the performance of the module. Both the wired connection test (connect the
module to the each equipment) and the wireless connection test (connect the module to the antennas) can
be implemented. The signal points can also be tested when you maintain and repair the module.
II. Structure
Figure-1 Structure of the S600
III. Method for Connecting the S600
1. Diagram of connecting the S600 to the equipment.
Figure-2. Configuration for Adjustment and Test of CDMA, PCS mode