Franklin Electric XTCS24, Инструкция по установке и руководство пользователя

Страница: 15 / 28

14
CAUTION: Changing the cycle durations will affect the water softener’s performance and
efficiency. The following settings should only be altered by a knowledgeable water treatment
professional.
Ensure the Regen Time
indicator is illuminated. Using ‘
↑’
and ‘
↓’ ,
set the desired time of regeneration minutes.
Press ‘NEXT’ button to set PROPORTIONAL BRINING.
Press ‘NEXT’ button to set cycle #1 duration.
Using ‘
↑’
and ‘
↓’ , the Proportional Brining function can be set to ON
or OFF. This feature can also be manually toggled on or off with the
ECO button on the face of the front panel. (See additional information
on Proportional Brining in the ECO section of the instruction manual.)
Press ‘NEXT’ button to set cycle #2 duration.
Display and Operation
– Installer Settings – Cycles (continued)
Ensure the Pounds and Fill
indicators are illuminated. Using ‘
↑’ and
‘
↓’ , set the desired amount of salt to be used during the regeneration
cycle.
Ensure the Service and Minutes
indicators are illuminated. Using ‘
↑’
and ‘
↓’
, set the desired length of time to allow fresh water in brine
tank to dissolve salt to make saturated brine.
NOTE: Minimum recommended time is 90 minutes.
Press ‘NEXT’ button to set cycle #3 duration.
Ensure the Backwash and Minutes indicators are illuminated. Using
‘
↑’
and ‘
↓’
, set the desired length of time for BACKWASH cycle
Press ‘NEXT’ button to set cycle #4 duration.
Ensure the Draw and Minutes
indicators are illuminated. Using ‘
↑’
and ‘
↓’
, set the desired length of time for BRINE DRAW cycle.
Press ‘NEXT’ button to set cycle #5 duration.