Franke SAPHIRA, Инструкция по эксплуатации

Страница: 51 / 61

Instruction for use Saphira Page 46 18.06.04 / Rev D / Maks 4 / PPB
16.5. Programming the hot water portion
 Press the + button (27) to reach the HOT WATER PORTION function.
 Place a cup under the pivotable delivery tube (17).
 Display: HOT WATER
PORTION
 Display:
PRESS FOR
HOT WATER
 Display: ENOUGH
HOT WATER ?
 Display:
PRESS FOR
HOT WATER
 Display: HOT WATER
PORTION
 Display:
PRESS FOR
HOT WATER
 Press the + button (27) to reach the next stage or the EXIT button (30) to exit the programming.
16.6. Programming the water hardness
 Press the + button (27) to reach the WATER HARDNESS function.
 Display: WATER HARDNESS
LEVEL 3

Press the PROG. button (26).
 By pressing the + (27) or – (28) button, you can set the water hardness.
 To save the setting, press the PROG. button (26).
 Press the + button (27) to reach the next function or the EXIT button (30) to exit the programming.

To determine the water hardness, read Chapter "Setting the water hardness".
16.7. Programming the time
The clock has to be programmed if the "Unit on" function is used.
 Press the + button (27) to reach the TIME function.
 Display: TIME
--:--
 Press the PROG. button (26).
 By pressing the + (27) or – (28) button, you can select the hour.
 To save the setting, press the PROG. button (26).
 Press the + (27) or – (28) button to select the minutes.
 To save the setting, press the PROG. button (26).
 Press the + button (27) to reach the next function or the EXIT button (30) to exit the programming.
16.8. Programming "Unit on"
The clock has to be programmed if the "Unit on" function is used.
 Press the + button (27) to reach the UNIT ON function.

Display: UNIT
ON --:--
 Press the PROG. button (26).
 By pressing the + (27) or – (28) button, you can adjust the hour.
 To save the setting, press the PROG. button (26).
 By pressing the + (27) or – (28) button, you can adjust the minutes.

To save the setting, press the PROG. button (26).
 Press the + button (27) to reach the next function or the EXIT button (30)to exit the programming.

The display --:-- means that the function is switched off