– 12 –
FMY 45 CM XS
EN
INSTALLATION
Controls after transport
After removing the packaging, make sure the product
is complete and undamaged and that all accessories
are present. Do not use the appliance if it is visibly
damaged. Contact Customer Services.
Installing the appliance
IMPORTANT
X
Installation must be performed by a qualified
professional in compliance with legislation in
force in the country of installation (see Built-in
installation).
X
The packing elements (plastic bags, polystyrene
foam, etc.) should be kept out of reach of
children.
X
Do not install the appliance in rooms where the
temperature may drop to 0°C or lower.
X
Customise the water hardness as soon as
possible following the instructions in the "Setting
water hardness" section.
Connecting the appliance
DANGER!
X
Check that the mains power supply voltage
corresponds to the value indicated on the rating
plate on the bottom of the appliance.
X
Connect the appliance to an efficiently earthed
and correctly installed socket with a minimum
current rating of 10A only.
X
If the power socket does not match the plug on
the appliance, have the socket replaced with
a suitable type by a qualified professional.
X
To comply with safety directives, an omnipolar
switch with a minimum contact distance of 3 mm
must be installed.
X
Do not use multiple sockets or extensions.
IMPORTANT:
Safety cutout devices must be
included in the mains power supply in compliance
with the installation regulations in the country
concerned.
Built-in installation
X
Verify the minimum measurements required for
correct installation of the appliance (Figure 1, 2
and 3).
X
The coffee maker must be installed in a column
and the column must be firmly fixed to the wall
with commercially available brackets.
m
m
65
4
595 mm
24 mm
412 m
m
45 m
m
45 m
m
45 m
m
45 m
m
054
m
m 2
+
500 m
m
0
58
i
M
m
m
n
545 m
m Mi
n.
200 cm
2
560 + 8 mm
361 mm
528 mm
m
m
2
7
3
30 mm
Fig. 1
m
m
65
4
595 mm
24 mm
412 m
m
45 m
m
45 m
m
45 m
m
45 m
m
054
mm
2
+
500 m
m
0
58
i
M
m
m
n
545 m
m Mi
n.
200 cm
2
560 + 8 mm
361 mm
528 mm
m
m
2
7
3
30 mm
Fig. 2
IMPORTANT
All installation or maintenance operations must be
performed with the appliance disconnected from
the mains electricity supply.
Kitchen furniture in direct contact with the
appliance must be heat resistant (65°C min).
To guarantee correct ventilation, leave a gap at
the bottom of the cabinet (see measurements in
(Figure 3).
Содержание Mythos FMY 45 CM XS
Страница 2: ......
Страница 4: ......
Страница 195: ......
Страница 196: ... Franke Technology and Trademark Ltd Switzerland 2021 02 V02 ID 20197016 www franke com ...