10
036865-004
0112
11
0112
036865-004
MODULAR SPORTS BOTTLE FILLER
InSTRUcTIOnS FOR MODELS: KEMWSBF, KEMW8SBF, KEMW12SBF,
KEM8SBF, KEM12SBF
MODULAR SPORTS BOTTLE FILLER
InSTRUcTIOnS FOR MODELS: KEMWSBF, KEMW8SBF, KEMW12SBF,
KEM8SBF, KEM12SBF
STEP 11: TRIM BEZEL InSTALLATIOn
a) Install frame assembly to a flat surface. Use appropriate fastening hardware (not included). Refer to the first 2 pages of this instruction
package for the correct installation height.
b) Remove bottom plate from trim bezel (4 Screws).
c) Install trim bezel to frame assembly and replace bottom plate with screws.
d) Install drain assembly, snap bushings and any other accessories included with this kit.
e) Install upper and lower front panel.
TRIM BEZEL
*
*
*
FRAME ASSEMBLY
UPPER AND LOWER
FRONT PANELS
FASTENING POINTS
ON FRAME
TRIM BEZEL BOTTOM
PLATE WITH SCREWS
TRIM BEZEL InSTALLATIOn
2 REQ’D
2 REQ’D
4 REQ’D
3 REQ’D
2 REQ’D
2 REQ’D
FLOW RESTRICTOR
THIS FLOW RESTRICTOR IS INTENDED TO MAKE YOUR WATER
FLOW AT THE PROPER RATE.
- PRESS THE FLOW RESTRICTOR FIRMLY INTO THE
TUBING PROVIDED.
- INSERT THE TUBING WITH THE FLOW RESTRICTOR INTO ELBOW
FITTING AT THE TOP FITTING OF THE SOLENOID VALVE.
ILLUSTRATED PARTS BREAK DOWn
Figure 12
