3
HHF49GZMI |
06/20
Set sensor range (if necessary)
5
3. Installation Guide (continued)
Connect power supply (AC, DC or AC with battery backup)
4
4.1 Connect the transformer to the control
box and plug the transformer into a GFI
wall outlet.
4.2 Put in 4 x AA batteries into battery box.
4.3 Close the control box.
To set the sensor range, hold down the
red reset button on the left hand side of
the control box for 3 seconds. Place a
hand in front of the sensor at a distance
where you want the water flow to trigger.
When the water turns on, the sensor has
been set.
