Franke FWD 1400-6EI, Руководство пользователя, Страница: 10 / 32

Select the available options by pressing
buttons 3, 4 and 6
Depending on the programme, different
functions can be combined. These must be
selected after choosing the desired pro-
gramme and before pressing button
8 .
When these buttons are pressed, the corre-
sponding icons appear on the display. When
they are pressed again, the icons disappear.
If an incorrect option is selected, the integra-
ted
red pilot light of the button 8 flashes for
3 times and the Err message appears on the
display for a few seconds.
For the compatibility among the washing
programmes and the options see chap-
ter «Washing Programmes».
Select the Delay Start by pressing
button 10
Before you start the programme, if you wish
to delay the start, press the button
10 re-
peatedly, to select the desired delay.
The selected delay time value (up to 20
hours) will appear on the display a few sec-
onds, then the duration of the programme
will appear again.
You must select this option after you have set
the programme and before you press button
8 .
You can cancel or modify the delay time at
any moment, before you press button
8 .
Selecting the delayed start:
1. Select the programme and the required
options.
2. Select the delay start by pressing the but-
ton 10 .
3. Press button 8 :
– the machine starts its hourly count-
down.
– The programme will start after the se-
lected delay has expired.
Cancelling the delayed start after having
pressed button
8 :
1. Set the washing machine to PAUSE by
pressing button 8 .
2. Press button 10 once until the symbol
’ is displayed
3. Press button 8 again to start the pro-
gramme.
Important! The selected delay can be
changed only after selecting the washing
programme again.
The Delay Start can not be selected with
DRAIN programme.
Start the programme by pressing button
8
To start the selected programme, press the
button
8 , the green pilot light of the button
8 stops blinking.
To interrupt a programme which is running,
press the button
8 : the green pilot light starts
blinking.
To restart the programme from the point at
which it was interrupted, press the button
8
again . If you have chosen a delayed start,
the machine will begin the countdown. If an
incorrect option is selected, the
red pilot light
of the button 8 blinks 3 times and the mes-
sage Err is displayed for a few seconds.
Altering an option or a running
programme
It is possible to change some options before
the programme carries them out.
Before you make any change, you must
PAUSE the appliance by pressing the button
8 .
Changing a running programme is possible
only by resetting it. Turn the programme se-
lector dial to
O and then to the new pro-
gramme position. Start the new programme
by pressing the button
8 again. The washing
water in the tub will be not emptied out.
Interrupting a programme
Press the button 8 to interrupt a programme
which is running, the corresponding green
pilot light starts blinking.
Press the button again to
restart the pro-
gramme.
Cancelling a programme
Turn the selector dial to to cancel a pro-
gramme which is running.
You can select now a new programme.
At the end of the programme
The machine stops automatically. Three
blinking
0.00 appear on the display and the
pilot light of button 8 goes off. Some acoustic
signals sound.
If a programme or an option that ends with
water left in the tub has been selected, the
door remains locked to indicate that the wa-
ter must be emptied out before opening the
door.
10