Franke FUD 5007 I XS, Инструкция по использованию и установке, Страница: 8 / 44

EN
8
8
Ceiling/Shelf drilling and Plate Fixing
CEILING/SHELF DRILLING
• Use a plumb-line and mark the centre of the cooking hob on the Support Ceiling/Shelf.
• Rest the plate against the ceiling/shelf, taking care to keep the limit pawl that has just been
fitted in a position facing the installer and the cooking hob (the limit pawl must not be con-
fused with the other 4 used to fix the steel cables that move the Hood).
• Mark on the ceiling the centres of the holes in the plate.
• Drill the following points:
• Ceilings in solid concrete: As per concrete plugs used.
• Ceilings in hollow bricks with 20 mm resistance thickness: Drill a hole ø 10 mm (insert
Plugs 11 supplied immediately).
• Ceilings with Wood Beams: As per Wood Screws used (not supplied).
• Wooden shelf, with a resistant thickness of 15 mm: drill a hole ø 7 mm.
•
Feeding the electric supply cable: drill a hole ø 10 mm.
Warning : there will be two lines to be connected: a direct electric line for the hood power
supply and another line with a switch for the lamp.
• Insert two screws, crossing them and leaving 4-5 mm from the ceiling:
• for solid concrete, concrete plugs, not provided.
• for hollow bricks with approx. 20 mm resistance thickness, screws
12h , provided.
• for wooden beams, wood screws, not provided.
• for wooden shelves, screws with washers and nuts, not provided.