PREPARATION OF THE FRAME FOR THE HOOD IN RE-CYCLING VERSION
In case the hood is used in recycling version it is necessary to prepare the frame with all the
necessary connection pieces. In order to make the installation easier it is necessary to
lengthen the frame:
• Unscrew the two screws fixing the upper chimney to the frame and pull the chimney out.
• Unscrew the four safety screws placed at the top in the frame separation area. (A).
• Unscrew the eight metric screws connecting the two columns, placed on both sides of the
frame (B). Installation of components in recycling version:
• Fix the recycling air outlet piece 15 to the upper part of the frame using four 12c screws
supplied with the hood.
• Fix the flange (ø120) 10 to the lower part of the recy-cling air outlet 15.
• Put the reducer flange 9 on the hood body outlet.
• At this point, join the flanges with a pipe. In order to calculate the height of the pipe it is
necessary to es-timate the height of the hood (mm) and subtract 615 mm. (H pipe = H hood-
615).
• Lengthen the frame so that the pipe can be inserted. Place the pipe between the two flanges
and block it. Make sure that the height of the frame is correct considering the height of the
cooker hood (H frame = H hood – 184). Adjust the height of the frame and tighten again the
earlier removed screws. Tighten again the safety screws in order to give more stability to the
structure.
• Fix the pipe with the pipe clamps 25 supplied with the hood
FIXING THE FRAME