Franke FRSM 603 C TD, Инструкция по установке и эксплуатации, Страница: 8 / 132

– 8 –
600
55
15
60
0
MIN
.
MIN
.
MIN
.
150 150
MIN
.
MIN
.
mm
40 mm
30 mm
Fig. 2
ELECTRICAL CONNECTION
Prior to carrying out the electrical connection, please ensure that:
-
the plant characteristics are such as to follow what is indicated on the
data plate placed at the bottom of the working area;
- that the plant is fitted with an efficient earth connection, following
the standards and law provisions in force.
The earth connection is compulsory in terms of the law.
Should there be no cable and/or plug on the equipment, use suitable
absorption material for the working temperature as well, as indicated on
the data plate.
If connecting directly to the mains power supply, fit a multi-pole switch
of a suitable size for the rated capacity with a clearance distance which
completely disconnects the power line under overvoltage category III
conditions, consistently with the rules of installation (yellow/green earth
wire must not be interrupted).
The plug or omnipolar switch must be easily reached on the installed
equipment.
Under no circumstance must the cable reach a temperature above 50 °C
of the ambient temperature.
NOTE: Make sure the characteristics of your household electrical power
supply (voltage, maximum output and current) are compatible with
those of your FRANKE hob.
THE POWER CABLE MUST ONLY BE REPLACED BY A QUALIFIED
ELECTRICIAN.
400V 3N~
400V 2N~
230V~
H05RR--F5x1.5
H05RR--F4x1.5
* H05RR--F3x2.5
1
2
3
4
5
L1 L2 L3 N
1
2
3
4
5
L1 L2 N
1
2
3
4
5
L N
Fig. 3 Considering contemporaneity factor