Franke FRSM 603 C TD, Инструкция по установке и эксплуатации, Страница: 10 / 132

– 10 –
TOUCH SENSITIVE KEYS
All operations can be performed using touch sensitive keys (optical
sensors) located on the front of the control panel; each key has
a corresponding display.
Each activity is confirmed by a beep.
NOTE: The first time that the hob is connected to the power supply, the
KeyLock function will be inserted. Press button (9) to deactivate it and
start using the product.
DAILY USE
TOUCH CONTROL HEATING ELEMENTS
TOUCH
CONTROL
HEAT INTENSITY
1
weak
2-3 gentle
4 slow
5-6 medium
7-8 strong
9 bright
SWITCHING ON A COOKING ZONE
1. Touch the touch key for 2 seconds. The control is powered on:
the power level indicators (3) show 0.
2. Perform the next operation within 10 seconds, otherwise the
device will switch off automatically.
• Press the key (2) corresponding to the cooking zone. The relative
display will show 0 flashing, indicating that the zone is on.
• Set the power level (1 to 9) using the keys and (5/4).
The keys and have a repeater function, i.e. holding these keys
pressed will increase or reduce the setting by one unit every
0.3 second.
Only one cooking zone may be switched on at a time, so only one hob
zone is flashing at a time.
SWITCHING OFF A COOKING ZONE
The cooking zone must be on.
Reduce the power level to 0 by pressing (4). After 10 seconds the
cooking zone will switch off automatically.
RAPID SWITCH OFF
The cooking zone must be on.
Press keys and (5/4) simultaneously and the zone will switch off
immediately.
RESIDUAL HEAT INDICATORS
While the cooking zone is still hot enough to cause burns, the
corresponding display shows the symbol
H
(residual heat). The symbol
only disappears when the temperature falls below 60° C and there is no
longer any risk of burns.
The display shows 0 as long as temperature remains below 60° C,
switching to H only when the temperature rises above 60° C.
•
Switch off the cooking zone before cooking is completed in order to
make use of the residual heat to save energy.
The residual heat indicator
H
will go out if the power supply is
interrupted. The appliance may be switched off at any time by pressing
the power key (1).
FUNCTIONS
DUAL CIRCUIT COOKING ZONE (ONLY MODEL FRSM 603 C TD)
The cooking zone may be equipped with a dual circuit, e.g. a central disc
and an outer ring. You can either use the central zone alone or both
zones together and thus adapt the cooking area to suit the size of the
pan.
SWITCHING ON A DUAL CIRCUIT COOKING ZONE
(ONLY MODEL FRSM 603 C TD)
The relative zone must be on.
•
Select the desired power level (1 to 9).
• Switch on the second circuit by pressing the dual circuit key (6).
The indicator light (10) of the selected zone will illuminate; the second
circuit is switched on together with the first.
SWITCHING OFF THE SECOND CIRCUIT OF A DUAL CIRCUIT
COOKING ZONE (ONLY MODEL FRSM 603 C TD)
The dual circuit zone must be on.
Touch the dual circuit key (6).
The indicator light (10) goes out and the second circuit is switched off.
APPLIANCE LOCK FUNCTION
The entire appliance may be locked to prevent unintentional operation
by pressing the lock key (9). This also serves a child safety function.
If the lock function is not deactivated before the appliance is switched
off, it will still be active when the appliance is next switched on.
While the lock function is activated, operating the keys will have no
effect.
AUTOMATIC SAFETY SWITCH OFF
If one or more cooking areas are inadvertently left on, the control
automatically turns them off or reduces their power after a certain
period of time.
In case of an automatic safety shut-off, the display shows the symbol
H ,
or Fc flashing.
To prevent automatic switch off, simply touch the zone selection key or
the and keys before the time limit expires.