Franke Frames CM FS 45 BK, Инструкция по установке и эксплуатации

Страница: 26 / 134

– 24 –
CM FS 45 BK
EN
TECHNICAL DATA
The data plate on the side of the appliance states the
total load when connected, the required voltage and
frequency.
Please check the minimum measures necessary to
the proper installation of the appliance. The coffee
maker must be installed in a column unit, which must
in turn be fixed to the wall.
SUPPORT
In the event of any operation problems, contact a
FRANKE Technical Service Centre (refer to the list on
the backpage).
Never use the services of unauthorised
technicians.
Specify:
– the type of fault;
– the appliance model (Art.);
– the serial number (S.N.).
DISPOSAL
The packaging of this appliance is recyclable and
may have been made of:
– cardboard
– paper
– polythene foil (PE)
– CFC-free polystyrene (PS hard foam)
– polypropylene tape (PP).
Dispose of these materials in a responsible manner
and in accordance with government regulations.
The barred dustbin symbol on the appliance
indicates that at the end of its service life
the product must be disposed of separately
from other waste.
Segregated processing enables the recovery of the
materials used in the production of this appliance,
thus saving considerably in terms of raw materials
and energy.
Declaration of conformity
We declare that our products meet the applicable
European Directives, Decisions and Regulations and
the requirements listed in the standards referenced.