Franke FMY 99 HS, Руководство пользователя

Страница: 25 / 26

EN
25
001
TROUBLESHOOTING
Problem Possible cause Solution
The oven is not
working.
Power cut.
Disconnection from the
mains.
Check for the presence of mains electrical power and
whether the oven is connected to the electricity supply.
Turn off the oven and restart it to see if the fault persists.
The display shows
the letter “F” followed
by a number or letter.
Oven failure.
Contact you nearest Client After-sales Service Centre
and state the number following the letter “F”.
Press
, tap and then select “Factory Reset”. All
settings saved will be deleted.
The home power
goes off.
Power setting wrong.
Verify if your domestic network has at least a rating of
more than 3 kW. If no, decrease the power to 13 Ampere.
To change it, press , select “More Modes” and then
select “Power Management”.
The function is not
available in demo
mode.
Demo mode is running.
Press , tap “Info” and then select “Store Demo
Mode” to exit.
The door will not
open.
Cleaning cycle in progress.
Wait for the function to finish and for the oven to cool
down.
Steam leaves the
drawer during
cooking.
Low water level in the tank. Add a glass of drinking water.
SUPPORT
In the event of any operation problems, contact a Franke
Technical Service Centre.
Never use the services of unauthorized technicians.
Specify:
- the type of fault
- the appliance model (art./Code)
- the serial number (S.N.) on the rating plate, located
on the right hand edge of the oven cavity (visible
when the oven door is open).
When contacting our
Service Centre, please
state the codes provided
on your product's
identification plate.
XXXXXX XXXXXX XXXXX XXXXXXX
Model: xxxXXXXxx
XXXXXXXXXX
XXXXXX
XXXXXXXXXX
XXXXXXXXXX
XX XXX XX XX XXXX XXXX XX X
XXXXXXXXXX