![background image](http://html.mh-extra.com/html/franke/fgas-3-e-fx-1000-ce-xs-wm/fgas-3-e-fx-1000-ce-xs-wm_instructions-for-use-and-installation_2327976011.webp)
9
GB
e- Check the connectors of the motor (
Fig 9)
.
f- Test the lights and the fan motor.
g- Fit the metal grease filters and close the deflector.
IN THE RECIRCULATION MODE:
a- To carry out an inlet for recycling air in the kitchen (
Fig.11
).
b- Connect the ducting 150mm (6 INS) not provided between motors
item 6
and the recirculation spigot
and secure the connections with appropriate clamping rings or adhesive tape (
Fig. 12
).
c- Make the electrical connection of the motor as described in the section titled ELECTRICAL.
d- Place the canopy under the motor housing and fix it with the crews provided as illustrated in
Fig. 10
.
Attention: 2 persons are necessary to secure this operation.
e- Connect the electrical plug of the motor cord on the body hood (
Fig.7
).
f- Check the connectors of the motor (
Fig 9)
.
g-
Test the lights and the fan motor.
h- Fit the charcoal filter onto the inlets of the motor (
Fig. 13
).
i- Fit the metal grease filters and close the deflector.
• CLIPPAGE ON THE FALSE CEILING
2) Mark the centre of the cooking appliance onto the ceiling with a plumb line. Draw the horizontal axes
running parallel to the stove top onto the ceiling as illustrated
Fig. 1
.
3) To carry out the cutting of embedding in the suspended ceiling (
Fig 2a
).
4) To remove the lighting front panel (
Fig. 15
).
5) To unscrew the screws of the clips according to the thickness of the false ceiling (
Fig. 16
). When fixing
the cooker hood to a plasterboard ceiling ensure it is reinforced as illustrated in
Fig. 17.
For the false
ceiling in MDF of 18 mm, 4 holds of compensation (2
m
m thickness) are provided with the hood.
6) Open the deflector (
Fig. 6 Rep. 12)
by pushing / unlocking (
Fig. 14
).
7) To remove the metal filters.
IN THE EXTRACTION MODE:
a- Fit the non-return backflow flaps
C
over the round outlet
item 6
on top of the canopy while pressing
down until they snap into position, and then connect the ducting 150mm (6 INS) and secure the connec-
tions with appropriate clamping rings or adhesive tape (
Fig. 8
).
b- Make the electrical connection of the motor as described in the section titled ELECTRICAL.
c- Place the canopy under the motor housing and fix it with the screws provided as illustrated in
Fig. 10
or clip the hood on the false ceiling (
Fig. 15
), to tighten the screws (
Fig. 16
) and to fit back the lighing
front panel.
Attention: 2 persons are necessary to secure this operation.
.
d- Connect the electrical plug of the motor cord on the body hood (
Fig.7
).
e- Check the connectors of the motor (
Fig 9)
.
f- Test the lights and the fan motor.
g- Fit the metal grease filters and close the deflector.
IN THE RECIRCULATION MODE:
a- To carry out an inlet for recycling air in the kitchen (
Fig.11
).
b- Connect the ducting 150mm (6 INS) not provided between motors
item 6
and the recirculation spigot
and secure the connections with appropriate clamping rings or adhesive tape (
Fig. 12
).
c- Make the electrical connection of the motor as described in the section titled ELECTRICAL.
d- Place the canopy under the motor housing and fix it with the screws provided as illustrated in
Fig. 10
or clip the hood on the false ceiling (
Fig. 15
), to tighten the screws (
Fig. 16
) and to fit back the lighing
front panel.
Attention: 2 persons are necessary to secure this operation.
e- Connect the electrical plug of the motor cord on the body hood (
Fig.7
).
f- Check the connectors of the motor (
Fig 9)
.
g-
Test the lights and the fan motor.
h- Fit the charcoal filter onto the inlets of the motor (
Fig. 13
).
i- Fit the metal grease filters and close the deflector.
Содержание FGAS/3 E FX 1000 CE XS WM
