Chapter 1
Ready, set up, go
9
IMPORTANT INFORMATION FOR INSTALLAING AND SERVICING THE APPLIANCE
The cooker can be installed separately, as a freestanding unit, or between kitchen units or between
a kitchen unit and the wall. This appliance is not connected to devices which exhaust combustion
products. Special attention must be focused on the prescriptions described below regarding room
aeration and ventilation. The dimensions of the appliance are listed below:
APPLIANCE SERVICING
IMPORTANT!
ALL SERVICING AND MAINTENANCE ARE TO BE COMPLETED BY THE MANUFACTURER’S
AUTHORISED PERSONNEL ONLY.
Before carrying any servicing operation disconnect the appliance from gas and electric supply and
extra appliance from final installation place in order to have access to the appliance for proper
servicing intervention.
GAS CONVERSION
WARNING!
Before carrying out this operation, disconnect the appliance from gas and electricity. Gas
conversion shall be conducted by a factory-trained professional. Call the customer service
hotline to identify a factory-trained professional near your home. The gas conversion
procedure for this range includes differents steps:
1. Pressure regulator
2. Surface burners
3. Main oven burner
4. Visual checks prior to closure of oven bottom panel
5. Adjustment of minimum setting
The conversion is not completed if all 5 steps have not been concluded properly.
Before performing the gas conversion, locate the package containing the replacement nozzle shipped
with every range.
IMPORTANT: Each nozzle has a number indicating its flow diameter printed on the body.
Consult the table on page 20 for matching nozzles to burners. Save the nozzles removed from the
range for future use.
STEP 1: PRESSURE REGULATOR.
For NG or ULPG installation ref. to fig. 7 and chapter ‘Appliance gas connection’ at pag 7
LENGTH
DEPTH
HEIGHT with worktop stamped HEIGHT with worktop welded
897mm
600mm
adjustable 870-940mm
adjustable 890-960mm
Fig.2
Fig.3
Cooker with worktop stamped
Cooker with worktop welded
