9
ZMI
_001_
2030
0190
25-F
A
ID0
003_
#SEN_
#
AQU_
#V1.
fm
13. Maintenance and care
Check the emergency shower once a month to make sure that it is in working order.
(Guidelines for Laboratories BGI/GUV-I 850-0)
As a measure for the prevention of microbiological contamination, it is recom-
mended that you replace the fill water in the fitting at shorter intervals by opening the
valve.
Use suitable cleaning agents which do not attack the fitting in a proper manner and
rinse with water after use. High-pressure cleaners must not be used for cleaning.
14. Troubleshooting
If you cannot rectify a fault or if it is not in the list, please contact our customer
service department!
15. Spare parts
Description
Order No.
Ball valve . . . . . . . . . . . . . . . . . . . 2030025022
☞
Other spare parts on request; see the wall bracket for material numbers.
Fault
Cause
Remedy
Water does not flow
– Water supply interrupted
➯
Restore it
Manual actuator is
catching
– Ball valve not correctly aligned
➯
Align it
– Pull rod or manual actuator bent
➯
Straighten it
– Ball valve stiff
➯
Replace it
Body shower is
dripping
– Ball valve defective
➯
Replace it
